Keysight Technologies InfiniiVision 3000T X Series - :POWer:HARMonics:DATA

:POWer Commands 26
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 599
:POWer:HARMonics:DATA
(see page 1276)
Query Syntax
:POWer:HARMonics:DATA?
The :POWer:HARMonics:DATA query returns the power harmonics results table
data.
Return Format
<binary_block> ::= comma-separated data with newlines at the end of each
row
See Also • ":POWer:HARMonics:APPLy" on page 598
• ":POWer:HARMonics:DISPlay" on page 600
• ":POWer:HARMonics:FAILcount" on page 601
• ":POWer:HARMonics:LINE" on page 602
• ":POWer:HARMonics:POWerfactor" on page 603
• ":POWer:HARMonics:RUNCount" on page 604
• ":POWer:HARMonics:STANdard" on page 605
• ":POWer:HARMonics:STATus" on page 606
• ":POWer:HARMonics:THD" on page 607