To Next Page

To Previous Page

:POWer Commands 26

Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 605

:POWer:HARMonics:STANdard

(see page 1276)

Command Syntax

:POWer:HARMonics:STANdard <class>

<class> ::= {A|B|C|D}

The :POWer:HARMonics:STANdard command selects the standard to perform

current harmonics compliance testing on.

• A — IEC 61000-3-2 Class A — for balanced three-phase equipment, household

appliances (except equipment identified as Class D), tools excluding portable

tools, dimmers for incandescent lamps, and audio equipment.

• B — IEC 61000-3-2 Class B — for portable tools.

• C — IEC 61000-3-2 Class C — for lighting equipment.

• D — IEC 61000-3-2 Class D — for equipment having a specified power

according less than or equal to 600 W, of the following types: personal

computers and personal computer monitors, television receivers.

Query Syntax

:POWer:HARMonics:STANdard?

The :POWer:HARMonics:STANdard query returns the currently set IEC 61000-3-2

standard.

Return Format

<class> ::= {A|B|C|D}

See Also • ":POWer:HARMonics:APPLy" on page 598

• ":POWer:HARMonics:DATA" on page 599

• ":POWer:HARMonics:DISPlay" on page 600

• ":POWer:HARMonics:FAILcount" on page 601

• ":POWer:HARMonics:LINE" on page 602

• ":POWer:HARMonics:POWerfactor" on page 603

• ":POWer:HARMonics:RUNCount" on page 604

• ":POWer:HARMonics:STATus" on page 606

• ":POWer:HARMonics:THD" on page 607

Keysight Technologies InfiniiVision 3000T X Series User Manual

Questions and Answers: