:MTESt Commands 24
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 563
:MTESt:COUNt:WAVeforms
(see page 1276)
Query Syntax
:MTESt:COUNt:WAVeforms?
The :MTESt:COUNt:WAVeforms? query returns the total number of waveforms
acquired in the current mask test run.
Return Format
<count><NL>
<count> ::= number of waveforms in NR1 format.
See Also • "Introduction to :MTESt Commands" on page 551
• ":MTESt:COUNt:FWAVeforms" on page 560
• ":MTESt:COUNt:TIME" on page 562
• ":MTESt:COUNt:RESet" on page 561
Example Code • "Example Code" on page 551