608 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:INRush:APPLy
(see page 1276)
Command Syntax
:POWer:INRush:APPLy
The :POWer:INRush:APPLy command applies the inrush current analysis.
The Inrush current analysis measures the peak inrush current of the power supply
when the power supply is first turned on.
See Also • ":MEASure:PCURrent" on page 540
• ":POWer:INRush:EXIT" on page 609
• ":POWer:INRush:NEXT" on page 610