Keysight Technologies InfiniiVision 3000T X Series - :DIGital<d> Commands

307
Keysight InfiniiVision 3000T X-Series Oscilloscopes
Programmer's Guide
13 :DIGital<d> Commands
Control all oscilloscope functions associated with individual digital channels. See
"Introduction to :DIGital<d> Commands" on page 308.
Table 91 :DIGital<d> Commands Summary
Command Query Options and Query Returns
:DIGital<d>:DISPlay
{{0 | OFF} | {1 |
ON}} (see page 309)
:DIGital<d>:DISPlay?
(see page 309)
<d> ::= 0 to (# digital channels
- 1) in NR1 format
{0 | 1}
:DIGital<d>:LABel
<string> (see
page 310)
:DIGital<d>:LABel?
(see page 310)
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<string> ::= any series of 10 or
less ASCII characters enclosed in
quotation marks
:DIGital<d>:POSition
<position> (see
page 311)
:DIGital<d>:POSition?
(see page 311)
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<position> ::= 0-7 if display
size = large, 0-15 if size =
medium, 0-31 if size = small
Returns -1 when there is no space
to display the digital waveform.
:DIGital<d>:SIZE
<value> (see page 312)
:DIGital<d>:SIZE?
(see page 312)
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<value> ::= {SMALl | MEDium |
LARGe}
:DIGital<d>:THReshold
<value>[suffix] (see
page 313)
:DIGital<d>:THReshold
? (see page 313)
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<value> ::= {CMOS | ECL | TTL |
<user defined value>}
<user defined value> ::= value in
NR3 format from -8.00 to +8.00
[suffix] ::= {V | mV | uV}