Keysight Technologies InfiniiVision 3000T X Series - :POWer:SIGNals:CYCLes:QUALity

626 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:SIGNals:CYCLes:QUALity
(see page 1276)
Command Syntax
:POWer:SIGNals:CYCLes:QUALity <count>
<count> ::= integer in NR1 format
Legal values are 1 to 100.
The :POWer:SIGNals:CYCLes:QUALity command specifies the number of cycles to
include in the power quality analysis.
Query Syntax
:POWer:SIGNals:CYCLes:QUALity?
The :POWer:SIGNals:CYCLes:QUALity query returns the number of cycles currently
set.
Return Format
<count><NL>
<count> ::= integer in NR1 format
See Also • ":POWer:QUALity:APPLy" on page 622
• ":POWer:SIGNals:AUTosetup" on page 624
• ":POWer:SIGNals:IEXPected" on page 633
• ":POWer:SIGNals:OVERshoot" on page 634
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 641
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 642