Keysight Technologies InfiniiVision 3000T X Series

To Next Page

To Previous Page

:SBUS<n> Commands 29

Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 859

:SBUS<n>:SPI:SOURce:MOSI

(see page 1276)

Command Syntax

:SBUS<n>:SPI:SOURce:MOSI <source>

<source> ::= {CHANnel<n> | EXTernal} for the DSO models

<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models

<n> ::= 1 to (# analog channels) in NR1 format

<d> ::= 0 to (# digital channels - 1) in NR1 format

The :SBUS<n>:SPI:SOURce:MOSI command sets the source for the SPI serial

MOSI data.

Query Syntax

:SBUS<n>:SPI:SOURce:MOSI?

The :SBUS<n>:SPI:SOURce:MOSI? query returns the current source for the SPI

serial MOSI data.

Return Format

See Also • "Introduction to :TRIGger Commands" on page 1007

• ":SBUS<n>:SPI:SOURce:MISO" on page 858

• ":SBUS<n>:SPI:SOURce:CLOCk" on page 856

• ":SBUS<n>:SPI:SOURce:FRAMe" on page 857

• ":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA" on page 860

• ":SBUS<n>:SPI:TRIGger:PATTern:MOSI:DATA" on page 862

• ":SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh" on page 861

• ":SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh" on page 863

Keysight Technologies InfiniiVision 3000T X Series - :SBUS<n>:SPI:SOURce:MOSI