Keysight Technologies InfiniiVision 3000T X Series User Manual

Common (*) Commands 5
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 189
*TST (Self Test)
(see page 1276)
Query Syntax
*TST?
The *TST? query performs a self-test on the instrument. The result of the test is
placed in the output queue. A zero indicates the test passed and a non-zero
indicates the test failed. If the test fails, refer to the troubleshooting section of the
Service Guide.
Return Format
<result><NL>
<result> ::= 0 or non-zero value; an integer in NR1 format
See Also • "Introduction to Common (*) Commands" on page 168

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English