Keysight Technologies InfiniiVision 3000T X Series User Manual

934 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
30 :SEARch Commands
:SEARch:SERial:CAN:SYMBolic:SIGNal
(see page 1276)
Command Syntax
:SEARch:SERial:CAN:SYMBolic:SIGNal <name>
<name> ::= quoted ASCII string
The :SEARch:SERial:CAN:SYMBolic:SIGNal command specifies the signal to
search for when CAN symbolic data has been loaded (recalled) into the
oscilloscope and the CAN serial search mode is set to MSIGnal.
Query Syntax
:SEARch:SERial:CAN:SYMBolic:SIGNal?
The :SEARch:SERial:CAN:SYMBolic:SIGNal? query returns the specified signal.
Return Format
<name><NL>
<name> ::= quoted ASCII string
See Also • ":RECall:DBC[:STARt]" on page 660
• ":SEARch:SERial:CAN:MODE" on page 927
• ":SEARch:SERial:CAN:SYMBolic:MESSage" on page 933
• ":SEARch:SERial:CAN:SYMBolic:VALue" on page 935

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English