Keysight Technologies InfiniiVision 3000T X Series

To Next Page

To Previous Page

:SAVE Commands 28

Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 695

:SAVE:WMEMory:SOURce

(see page 1276)

Command Syntax

:SAVE:WMEMory:SOURce <source>

<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}

<n> ::= 1 to (# analog channels) in NR1 format

<m> ::= 1 to (# math functions) in NR1 format

<r> ::= 1 to (# ref waveforms) in NR1 format

The :SAVE:WMEMory:SOURce command selects the source to be saved as a

reference waveform file.

Query Syntax

:SAVE:WMEMory:SOURce?

The :SAVE:WMEMory:SOURce? query returns the source to be saved as a

reference waveform file.

Return Format

<source> ::= {CHAN<n> | FUNC | WMEM<r> | NONE}

See Also • "Introduction to :SAVE Commands" on page 669

• ":SAVE:WMEMory[:STARt]" on page 696

• ":RECall:WMEMory<r>[:STARt]" on page 665

NOTE

Only ADD or SUBtract math operations can be saved as reference waveforms.

NOTE

MATH is an alias for FUNCtion. The query will return FUNC if the source is FUNCtion or MATH.

Keysight Technologies InfiniiVision 3000T X Series - :SAVE:WMEMory:SOURce