Keysight Technologies InfiniiVision 3000T X Series - :SAVE:PWD

682 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
28 :SAVE Commands
:SAVE:PWD
(see page 1276)
Command Syntax
:SAVE:PWD <path_name>
<path_name> ::= quoted ASCII string
The :SAVE:PWD command sets the present working directory for save operations.
Query Syntax
:SAVE:PWD?
The :SAVE:PWD? query returns the currently set working directory for save
operations.
Return Format
<path_name><NL>
<path_name> ::= quoted ASCII string
See Also • "Introduction to :SAVE Commands" on page 669
• ":SAVE:FILename" on page 672
• ":RECall:PWD" on page 663
NOTE
Presently, the internal "/User Files" directory you see in the oscilloscope's front panel user
interface is the "\Agilent Flash" directory you see in the remote interface.