Keysight Technologies InfiniiVision 3000T X Series - :SBUS<n>:CAN:COUNt:OVERload

:SBUS<n> Commands 29
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 723
:SBUS<n>:CAN:COUNt:OVERload
(see page 1276)
Query Syntax
:SBUS<n>:CAN:COUNt:OVERload?
Returns the overload frame count.
Return Format
<frame_count><NL>
<frame_count> ::= 0 in NR1 format
Errors • "-241, Hardware missing" on page 1235
See Also • ":SBUS<n>:CAN:COUNt:RESet" on page 724
• "Introduction to :SBUS<n> Commands" on page 697
• ":SBUS<n>:MODE" on page 701
• ":SBUS<n>:CAN Commands" on page 719