Keysight Technologies InfiniiVision 3000T X Series - :DISPlay:VECTors

332 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
14 :DISPlay Commands
:DISPlay:VECTors
(see page 1276)
Command Syntax
:DISPlay:VECTors <vectors>
<vectors> ::= {1 | ON}
Vector display is always ON in the 3000T X-Series oscilloscopes.
When vectors are turned on, the oscilloscope displays lines connecting sampled
data points.
Query Syntax
:DISPlay:VECTors?
The :DISPlay:VECTors? query returns the vectors setting.
Return Format
<vectors><NL>
<vectors> ::= 1
See Also • "Introduction to :DISPlay Commands" on page 316