Keysight Technologies InfiniiVision 3000T X Series - :HARDcopy:NETWork:APPLy

412 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
19 :HARDcopy Commands
:HARDcopy:NETWork:APPLy
(see page 1276)
Command Syntax
:HARDcopy:NETWork:APPLy
The :HARDcopy:NETWork:APPLy command applies the network printer settings
and makes the printer connection.
See Also • "Introduction to :HARDcopy Commands" on page 404
• ":HARDcopy:NETWork:SLOT" on page 415
• ":HARDcopy:NETWork:ADDRess" on page 411
• ":HARDcopy:NETWork:DOMain" on page 413
• ":HARDcopy:NETWork:USERname" on page 416
• ":HARDcopy:NETWork:PASSword" on page 414