Keysight Technologies InfiniiVision 3000T X Series User Manual

634 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:SIGNals:OVERshoot
(see page 1276)
Command Syntax
:POWer:SIGNals:OVERshoot <percent>
<percent> ::= percent of overshoot value in NR1 format
The :POWer:SIGNals:OVERshoot command specifies the percent of overshoot of
the output voltage. This value is used to determine the settling band value for the
transient response and to adjust the vertical scale of the oscilloscope.
Query Syntax
:POWer:SIGNals:OVERshoot?
The :POWer:SIGNals:OVERshoot query returns the overshoot percent setting.
Return Format
<percent><NL>
<percent> ::= percent of overshoot value in NR1 format
See Also • ":POWer:TRANsient:APPLy" on page 651
• ":POWer:SIGNals:AUTosetup" on page 624
• ":POWer:SIGNals:DURation:TRANsient" on page 632
• ":POWer:SIGNals:IEXPected" on page 633
• ":POWer:SIGNals:VSTeady:TRANsient" on page 640
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 641
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 642

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English