654 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:TRANsient:INEW
(see page 1276)
Command Syntax
:POWer:TRANsient:INEW <value>[suffix]
<value> ::= New current value in NR3 format
[suffix] ::= {A | mA}
The :POWer:TRANsient:INEW command to specify the new load current value. The
new load current will be used as a reference and to trigger the oscilloscope.
Query Syntax
:POWer:TRANsient:INEW?
The :POWer:TRANsient:INEW query returns the new load current value.
Return Format
<value><NL>
<value> ::= New current value in NR3 format
See Also • ":POWer:TRANsient:APPLy" on page 651
• ":POWer:TRANsient:EXIT" on page 652
• ":POWer:TRANsient:IINitial" on page 653
• ":POWer:TRANsient:NEXT" on page 655
To Next Page
Loading...
