:POWer Commands 26
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 617
:POWer:ONOFf:TEST
(see page 1276)
Command Syntax
:POWer:ONOFf:TEST {{0 | OFF} | {1 | ON}}
The :POWer:ONOFf:TEST command selects whether turn on or turn off analysis is
performed:
• ON — Turn On — measures the time taken to get the output voltage of the
power supply after the input voltage is applied.
• OFF — Turn Off — measures the time taken for the output voltage of the power
supply to turn off after the input voltage is removed.
Query Syntax
:POWer:ONOFf:TEST?
The :POWer:ONOFf:TEST query returns the selected test type.
Return Format
{0 | 1}
See Also • ":POWer:ONOFf:APPLy" on page 614
• ":POWer:ONOFf:EXIT" on page 615
• ":POWer:ONOFf:NEXT" on page 616
To Next Page
Loading...
