To Next Page

To Previous Page

Obsolete and Discontinued Commands 37

Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1207

:MEASure:TMIN

(see page 1276)

Command Syntax

:MEASure:TMIN [<source>]

<source> ::= {CHANnel<n> | FUNCtion | MATH}

<n> ::= 1 to (# analog channels) in NR1 format

The :MEASure:TMIN command installs a screen measurement and starts an

X-at-Min-Y measurement on the selected waveform. If the optional source is

specified, the current source is modified.

Query Syntax

:MEASure:TMIN? [<source>]

The :MEASure:TMIN? query returns the horizontal axis value at which the minimum

vertical value occurs on the current source. If the optional source is specified, the

current source is modified. If all channels are off, the query returns 9.9E+37.

Return Format

<value> ::= time at minimum in NR3 format

See Also • "Introduction to :MEASure Commands" on page 458

• ":MEASure:TMAX" on page 1206

• ":MEASure:XMAX" on page 522

• ":MEASure:XMIN" on page 523

NOTE

The :MEASure:TMIN command is obsolete and is provided for backward compatibility to

previous oscilloscopes. Use the :MEASure:XMIN command (see page 523) instead.

Keysight Technologies InfiniiVision 3000T X Series User Manual

Questions and Answers: