892 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
30 :SEARch Commands
:SEARch:EVENt
(see page 1276)
Command Syntax
:SEARch:EVENt <event_number>
<event_number> ::= the integer number of a found search event
The :SEARch:EVENt command navigates to a found search event.
If the :SEARch:STATe is ON, the horizontal position is changed so that the
specified event is located at the time reference.
Query Syntax
:SEARch:EVENt?
The :SEARch:EVENt? query returns the currently selected event number.
Return Format
<event_number><NL>
<event_number> ::= the integer number of a found search event
See Also • Chapter 30, “:SEARch Commands,” starting on page 889
• ":SEARch:COUNt" on page 891
• ":SEARch:STATe" on page 894
• ":SEARch:MODE" on page 893
To Next Page
Loading...
