Keysight Technologies InfiniiVision 3000T X Series User Manual

1284 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
41 More About Oscilloscope Commands
All Oscilloscope Commands Are Sequential
IEEE 488.2 makes the distinction between sequential and overlapped commands:
• Sequential commands finish their task before the execution of the next
command starts.
• Overlapped commands run concurrently. Commands following an overlapped
command may be started before the overlapped command is completed.
All of the oscilloscope commands are sequential.

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English