Keysight Technologies InfiniiVision 3000T X Series - :SBUS<n>:LIN:PARity

798 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
29 :SBUS<n> Commands
:SBUS<n>:LIN:PARity
(see page 1276)
Command Syntax
:SBUS<n>:LIN:PARity <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :SBUS<n>:LIN:PARity command determines whether the parity bits are
included as the most significant bits (MSB) in the display of the Frame Id field in
the LIN decode bus.
Query Syntax
:SBUS<n>:LIN:PARity?
The :SBUS<n>:LIN:PARity? query returns the current LIN parity bits display setting
of the serial decode bus.
Return Format
<display><NL>
<display> ::= {0 | 1}
Errors • "-241, Hardware missing" on page 1235
See Also • "Introduction to :SBUS<n> Commands" on page 697
• ":SBUS<n>:LIN Commands" on page 796