:SAVE Commands 28
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 687
:SAVE:RESults:FORMat:SEARch
(see page 1276)
Command Syntax
:SAVE:RESults:FORMat:SEARch {{0 | OFF} | {1 | ON}}
The :SAVE:RESults:FORMat:SEARch command specifies whether found search
event times will be included when analysis results are saved.
Analysis results are saved using the :SAVE:RESults:[STARt] command.
Other :SAVE:RESults:FORMat commands specify whether other types of analysis
results are also saved.
When multiple types of analysis results are saved, they are all saved to the same
file and separated by a blank line.
Query Syntax
:SAVE:RESults:FORMat:SEARch?
The :SAVE:RESults:FORMat:SEARch? query returns whether found search event
times will be included when analysis results are saved.
Return Format
<off_on><NL>
{0 | 1}
See Also • ":SAVE:RESults:[STARt]" on page 683
• ":SAVE:RESults:FORMat:CURSor" on page 684
• ":SAVE:RESults:FORMat:MASK" on page 685
• ":SAVE:RESults:FORMat:MEASurement" on page 686
• ":SAVE:RESults:FORMat:SEGMented" on page 688
To Next Page
Loading...
