Keysight Technologies InfiniiVision 3000T X Series - :SEARch:TRANsition:SLOPe

:SEARch Commands 30
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 917
:SEARch:TRANsition:SLOPe
(see page 1276)
Command Syntax
:SEARch:TRANsition:SLOPe <slope>
<slope> ::= {NEGative | POSitive}
The :SEARch:TRANsition:SLOPe command selects whether to search for rising
edge (POSitive slope) transitions or falling edge (NEGative slope) transitions.
Query Syntax
:SEARch:TRANsition:SLOPe?
The :SEARch:TRANsition:SLOPe? query returns the current transition search slope
setting.
Return Format
<slope><NL>
<slope> ::= {NEG | POS}
See Also • Chapter 30, “:SEARch Commands,” starting on page 889
• ":SEARch:MODE" on page 893
• ":SEARch:TRANsition:SOURce" on page 918
• ":SEARch:TRANsition:TIME" on page 919