Keysight Technologies InfiniiVision 3000T X Series User Manual

:SEARch Commands 30
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 977
:SEARch:SERial:UART:QUALifier
(see page 1276)
Command Syntax
:SEARch:SERial:UART:QUALifier <value>
<value> ::= {EQUal | NOTequal | GREaterthan | LESSthan}
The :SEARch:SERial:UART:QUALifier command specifies the data value qualifier
when searching for UART/RS232 events.
Query Syntax
:SEARch:SERial:UART:QUALifier?
The :SEARch:SERial:UART:QUALifier? query returns the current data value qualifier
setting.
Return Format
<value><NL>
<value> ::= {EQU | NOT | GRE | LESS}
See Also • Chapter 30, “:SEARch Commands,” starting on page 889
• ":SEARch:SERial:UART:DATA" on page 975

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English