Keysight Technologies InfiniiVision 3000T X Series - :SAVE:IMAGe:PALette

:SAVE Commands 28
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 677
:SAVE:IMAGe:PALette
(see page 1276)
Command Syntax
:SAVE:IMAGe:PALette <palette>
<palette> ::= {COLor | GRAYscale}
The :SAVE:IMAGe:PALette command sets the image palette color.
Query Syntax
:SAVE:IMAGe:PALette?
The :SAVE:IMAGe:PALette? query returns the selected image palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY}
See Also • "Introduction to :SAVE Commands" on page 669
• ":SAVE:IMAGe[:STARt]" on page 673
• ":SAVE:IMAGe:FACTors" on page 674
• ":SAVE:IMAGe:FORMat" on page 675
• ":SAVE:IMAGe:INKSaver" on page 676