Keysight Technologies InfiniiVision 3000T X Series - :WMEMory<r>:SKEW

:WMEMory<r> Commands 36
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1171
:WMEMory<r>:SKEW
(see page 1276)
Command Syntax
:WMEMory<r>:SKEW <skew>
<r> ::= 1 to (# ref waveforms) in NR1 format
<skew> ::= time in seconds in NR3 format
The :WMEMory<r>:SKEW command sets the skew factor for the specified
reference waveform.
Query Syntax
:WMEMory<r>:SKEW?
The :WMEMory<r>:SKEW? query returns the current skew setting for the selected
reference waveform.
Return Format
<skew><NL>
<skew> ::= time in seconds in NR3 format
See Also • Chapter 36, “:WMEMory<r> Commands,” starting on page 1165
• ":WMEMory<r>:DISPlay" on page 1168
• ":WMEMory<r>:YOFFset" on page 1172
• ":WMEMory<r>:YRANge" on page 1173
• ":WMEMory<r>:YSCale" on page 1174