Keysight Technologies InfiniiVision 3000T X Series - :RECall:FILename

:RECall Commands 27
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 661
:RECall:FILename
(see page 1276)
Command Syntax
:RECall:FILename <base_name>
<base_name> ::= quoted ASCII string
The :RECall:FILename command specifies the source for any RECall operations.
Query Syntax
:RECall:FILename?
The :RECall:FILename? query returns the current RECall filename.
Return Format
<base_name><NL>
<base_name> ::= quoted ASCII string
See Also • "Introduction to :RECall Commands" on page 658
• ":RECall:SETup[:STARt]" on page 664
• ":SAVE:FILename" on page 672
NOTE
This command specifies a file's base name only, without path information or an extension.