Keysight Technologies InfiniiVision 3000T X Series - :RECall Commands

657
Keysight InfiniiVision 3000T X-Series Oscilloscopes
Programmer's Guide
27 :RECall Commands
Recall previously saved oscilloscope setups, reference waveforms, and masks.
Table 105 :RECall Commands Summary
Command Query Options and Query Returns
:RECall:ARBitrary:[ST
ARt] [<file_spec>][,
<column>][,
<wavegen_id>] (see
page 659)
n/a <file_spec> ::= {<internal_loc>
| <file_name>}
<column> ::= Column in CSV file
to load. Column number starts
from 1.
<internal_loc> ::= 0-3; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
<wavegen_id> ::= WGEN1
:RECall:DBC[:STARt]
[<file_name>] [,
<serialbus>] (see
page 660)
n/a <file_name> ::= quoted ASCII
string
If extension included in file
name, it must be ".dbc".
<serialbus> ::= {SBUS<n>}
<n> ::= 1 to (# of serial bus) in
NR1 format
:RECall:FILename
<base_name> (see
page 661)
:RECall:FILename?
(see page 661)
<base_name> ::= quoted ASCII
string
:RECall:MASK[:STARt]
[<file_spec>] (see
page 662)
n/a <file_spec> ::= {<internal_loc>
| <file_name>}
<internal_loc> ::= 0-3; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
:RECall:PWD
<path_name> (see
page 663)
:RECall:PWD? (see
page 663)
<path_name> ::= quoted ASCII
string