Keysight Technologies InfiniiVision 3000T X Series - :TRIGger:GLITch:SOURce

:TRIGger Commands 33
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1045
:TRIGger:GLITch:SOURce
(see page 1276)
Command Syntax
:TRIGger:GLITch:SOURce <source>
<source> ::= {DIGital<d> | CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :TRIGger:GLITch:SOURce command selects the channel that produces the
pulse width trigger.
Query Syntax
:TRIGger:GLITch:SOURce?
The :TRIGger:GLITch:SOURce? query returns the current pulse width source. If all
channels are off, the query returns "NONE".
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 1007
• ":TRIGger:MODE" on page 1016
• ":TRIGger:GLITch:LEVel" on page 1041
• ":TRIGger:GLITch:POLarity" on page 1042
• ":TRIGger:GLITch:QUALifier" on page 1043
• ":TRIGger:GLITch:RANGe" on page 1044
Example Code • "Example Code" on page 1036