242 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
7 :ACQuire Commands
:ACQuire:SRATe
(see page 1276)
Query Syntax
:ACQuire:SRATe? [MAXimum]
The :ACQuire:SRATe? query returns the current oscilloscope acquisition sample
rate. The sample rate is not directly controllable.
When the MAXimum parameter is used, the oscilloscope's maximum possible
sample rate is returned.
Return Format
<sample_rate><NL>
<sample_rate> ::= sample rate in NR3 format
See Also • "Introduction to :ACQuire Commands" on page 231
• ":ACQuire:POINts" on page 236
To Next Page
Loading...
