Keysight Technologies InfiniiVision 3000T X Series User Manual

:SBUS<n> Commands 29
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 861
:SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh
(see page 1276)
Command Syntax
:SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh <width>
<width> ::= integer from 4 to 64 in NR1 format
The :SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh command sets the width of the
SPI data pattern anywhere from 4 bits to 64 bits.
Query Syntax
:SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh?
The :SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh? query returns the current SPI
data pattern width setting.
Return Format
<width><NL>
<width> ::= integer from 4 to 64 in NR1 format
See Also • "Introduction to :TRIGger Commands" on page 1007
• ":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA" on page 860
• ":SBUS<n>:SPI:SOURce:MISO" on page 858
NOTE
The :SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh should be set before
:SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA.

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English