Keysight Technologies InfiniiVision 3000T X Series - :PRINt

Root (:) Commands 6
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 223
:PRINt
(see page 1276)
Command Syntax
:PRINt [<options>]
<options> ::= [<print option>][,..,<print option>]
<print option> ::= {COLor | GRAYscale | PRINter0 | PRINter1 | BMP8bit
| BMP | PNG | NOFactors | FACTors}
The <print option> parameter may be repeated up to 5 times.
The PRINt command formats the output according to the currently selected
format (device). If an option is not specified, the value selected in the Print Config
menu is used.
See Also • "Introduction to Root (:) Commands" on page 194
• "Introduction to :HARDcopy Commands" on page 404
• ":HARDcopy:FACTors" on page 407
• ":HARDcopy:GRAYscale" on page 1199
• ":DISPlay:DATA" on page 325