Keysight Technologies InfiniiVision 3000T X Series - :RECall:PWD

:RECall Commands 27
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 663
:RECall:PWD
(see page 1276)
Command Syntax
:RECall:PWD <path_name>
<path_name> ::= quoted ASCII string
The :RECall:PWD command sets the present working directory for recall
operations.
Query Syntax
:RECall:PWD?
The :RECall:PWD? query returns the currently set working directory for recall
operations.
Return Format
<path_name><NL>
<path_name> ::= quoted ASCII string
See Also • "Introduction to :RECall Commands" on page 658
• ":SAVE:PWD" on page 682
NOTE
Presently, the internal "/User Files" directory you see in the oscilloscope's front panel user
interface is the "\Agilent Flash" directory you see in the remote interface.