Keysight Technologies InfiniiVision 3000T X Series - :TRIGger:RUNT Commands

1056 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
33 :TRIGger Commands
:TRIGger:RUNT Commands
Table 143 :TRIGger:RUNT Commands Summary
Command Query Options and Query Returns
:TRIGger:RUNT:POLarit
y <polarity> (see
page 1057)
:TRIGger:RUNT:POLarit
y? (see page 1057)
<polarity> ::= {POSitive |
NEGative | EITHer}
:TRIGger:RUNT:QUALifi
er <qualifier> (see
page 1058)
:TRIGger:RUNT:QUALifi
er? (see page 1058)
<qualifier> ::= {GREaterthan |
LESSthan | NONE}
:TRIGger:RUNT:SOURce
<source> (see
page 1059)
:TRIGger:RUNT:SOURce?
(see page 1059)
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels)
in NR1 format
:TRIGger:RUNT:TIME
<time>[suffix] (see
page 1060)
:TRIGger:RUNT:TIME?
(see page 1060)
<time> ::= floating-point number
in NR3 format
[suffix] ::= {s | ms | us | ns |
ps}