684 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
28 :SAVE Commands
:SAVE:RESults:FORMat:CURSor
(see page 1276)
Command Syntax
:SAVE:RESults:FORMat:CURSor {{0 | OFF} | {1 | ON}}
The :SAVE:RESults:FORMat:CURSor command specifies whether cursor values
will be included when analysis results are saved.
Analysis results are saved using the :SAVE:RESults:[STARt] command.
Other :SAVE:RESults:FORMat commands specify whether other types of analysis
results are also saved.
When multiple types of analysis results are saved, they are all saved to the same
file and separated by a blank line.
Query Syntax
:SAVE:RESults:FORMat:CURSor?
The :SAVE:RESults:FORMat:CURSor? query returns whether cursor values will be
included when analysis results are saved.
Return Format
<off_on><NL>
{0 | 1}
See Also • ":SAVE:RESults:[STARt]" on page 683
• ":SAVE:RESults:FORMat:MASK" on page 685
• ":SAVE:RESults:FORMat:MEASurement" on page 686
• ":SAVE:RESults:FORMat:SEARch" on page 687
• ":SAVE:RESults:FORMat:SEGMented" on page 688
To Next Page
Loading...
