To Next Page

To Previous Page

1174 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide

36 :WMEMory<r> Commands

:WMEMory<r>:YSCale

(see page 1276)

Command Syntax

:WMEMory<r>:YSCale <scale>[<suffix>]

<r> ::= 1 to (# ref waveforms) in NR1 format

<scale> ::= vertical units per division in NR3 format

<suffix> ::= {V | mV}

The :WMEMory<r>:YSCale command sets the vertical scale, or units per division,

of the selected reference waveform.

Legal values for the scale are copied from the original source waveform (that is,

the analog channel or math function waveform that was originally saved as a

reference waveform).

Query Syntax

:WMEMory<r>:YSCale?

The :WMEMory<r>:YSCale? query returns the current scale setting for the

specified reference waveform.

Return Format

<scale> ::= vertical units per division in NR3 format

See Also • Chapter 36, “:WMEMory<r> Commands,” starting on page 1165

• ":WMEMory<r>:DISPlay" on page 1168

• ":WMEMory<r>:YOFFset" on page 1172

• ":WMEMory<r>:YRANge" on page 1173

• ":WMEMory<r>:SKEW" on page 1171

Keysight Technologies InfiniiVision 3000T X Series User Manual

Questions and Answers: