:WGEN<w> Commands 35
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1131
:WGEN<w>:ARBitrary:DATA:ATTRibute:POINts
(see page 1276)
Query Syntax
:WGEN<w>:ARBitrary:DATA:ATTRibute:POINts?
<w> ::= 1 or 2 in NR1 format
The :WGEN<w>:ARBitrary:DATA:ATTRibute:POINts query returns the number of
points used by the current arbitrary waveform.
Return Format
<points> ::= number of points in NR1 format
See Also • ":WGEN<w>:ARBitrary:DATA" on page 1130
• ":WGEN<w>:ARBitrary:DATA:DAC" on page 1133
• ":SAVE:ARBitrary[:STARt]" on page 671
• ":RECall:ARBitrary[:STARt]" on page 659
To Next Page
Loading...
