To Next Page

To Previous Page

Obsolete and Discontinued Commands 37

Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1195

:FUNCtion:SOURce

(see page 1276)

Command Syntax

:FUNCtion:SOURce <value>

<value> ::= {CHANnel<n> | ADD | SUBTract | MULTiply}

<n> ::= 1 to (# analog channels) in NR1 format

The :FUNCtion:SOURce command is only used when an FFT (Fast Fourier

Transform), DIFF, or INT operation is selected (see the:FUNCtion:OPERation

command for more information about selecting an operation). The

:FUNCtion:SOURce command selects the source for function operations. Choose

CHANnel<n>, or ADD, SUBT, or MULT to specify the desired source for function

DIFF (differentiate), INTegrate, and FFT operations specified by the

:FUNCtion:OPERation command.

Query Syntax

:FUNCtion:SOURce?

The :FUNCtion:SOURce? query returns the current source for function operations.

Return Format

<value> ::= {CHAN<n> | ADD | SUBT | MULT}

<n> ::= 1 to (# analog channels) in NR1 format

See Also • "Introduction to :FUNCtion<m> Commands" on page 368

• ":FUNCtion<m>:OPERation" on page 390

NOTE

The :FUNCtion:SOURce command is an obsolete command provided for compatibility to

previous oscilloscopes. Use the :FUNCtion:SOURce1 command (see page 398) instead.

Keysight Technologies InfiniiVision 3000T X Series User Manual

Questions and Answers: