Keysight Technologies InfiniiVision 3000T X Series - :WMEMory<r>:CLEar

:WMEMory<r> Commands 36
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1167
:WMEMory<r>:CLEar
(see page 1276)
Command Syntax
:WMEMory<r>:CLEar
<r> ::= 1 to (# ref waveforms) in NR1 format
The :WMEMory<r>:CLEar command clears the specified reference waveform
location.
See Also • Chapter 36, “:WMEMory<r> Commands,” starting on page 1165
• ":WMEMory<r>:SAVE" on page 1170
• ":WMEMory<r>:DISPlay" on page 1168