Keysight Technologies InfiniiVision 3000T X Series User Manual

632 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:SIGNals:DURation:TRANsient
(see page 1276)
Command Syntax
:POWer:SIGNals:DURation:TRANsient <value>[suffix]
<value> ::= value in NR3 format
[suffix] ::= {s | ms | us | ns}
The :POWer:SIGNals:DURation:TRANsient command specifies the duration of the
transient response analysis.
Query Syntax
:POWer:SIGNals:DURation:TRANsient?
The :POWer:SIGNals:DURation:TRANsient query returns the set duration time
value.
Return Format
<value><NL>
<value> ::= value in NR3 format
See Also • ":POWer:TRANsient:APPLy" on page 651
• ":POWer:SIGNals:AUTosetup" on page 624
• ":POWer:SIGNals:IEXPected" on page 633
• ":POWer:SIGNals:OVERshoot" on page 634
• ":POWer:SIGNals:VSTeady:TRANsient" on page 640
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 641
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 642

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English