Keysight Technologies InfiniiVision 3000T X Series User Manual

:SEARch Commands 30
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 959
:SEARch:SERial:LIN:PATTern:DATA:LENGth
(see page 1276)
Command Syntax
:SEARch:SERial:LIN:PATTern:DATA:LENGth <length>
<length> ::= integer from 1 to 8 in NR1 format
The :SEARch:SERial:LIN:PATTern:DATA:LENGth command specifies the the length
of the data value when searching for LIN events.
The data value is specified using the :SEARch:SERial:LIN:PATTern:DATA command.
Query Syntax
:SEARch:SERial:LIN:PATTern:DATA:LENGth?
The :SEARch:SERial:LIN:PATTern:DATA:LENGth? query returns the current data
value length setting.
Return Format
<length><NL>
<length> ::= integer from 1 to 8 in NR1 format
See Also • Chapter 30, “:SEARch Commands,” starting on page 889
• ":SEARch:SERial:LIN:PATTern:DATA" on page 958

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English