Keysight Technologies InfiniiVision 3000T X Series - :SEARch:SERial:CAN:PATTern:DATA:LENGth

930 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
30 :SEARch Commands
:SEARch:SERial:CAN:PATTern:DATA:LENGth
(see page 1276)
Command Syntax
:SEARch:SERial:CAN:PATTern:DATA:LENGth <length>
<length> ::= integer from 1 to 8 in NR1 format
The :SEARch:SERial:CAN:PATTern:DATA:LENGth command specifies the length of
the data value when searching for Data Frame ID and Data.
The data value is specified using the :SEARch:SERial:CAN:PATTern:DATA
command.
Query Syntax
:SEARch:SERial:CAN:PATTern:DATA:LENGth?
The :SEARch:SERial:CAN:PATTern:DATA:LENGth? query returns the current data
length setting.
Return Format
<length><NL>
<length> ::= integer from 1 to 8 in NR1 format
See Also • Chapter 30, “:SEARch Commands,” starting on page 889
• ":SEARch:SERial:CAN:MODE" on page 927
• ":SEARch:SERial:CAN:PATTern:DATA" on page 929