Keysight Technologies InfiniiVision 3000T X Series User Manual

:SEARch Commands 30
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 929
:SEARch:SERial:CAN:PATTern:DATA
(see page 1276)
Command Syntax
:SEARch:SERial:CAN:PATTern:DATA <string>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X}
for hexadecimal
The :SEARch:SERial:CAN:PATTern:DATA command specifies the data value when
searching for Data Frame ID and Data.
The length of the data value is specified using the
:SEARch:SERial:CAN:PATTern:DATA:LENGth command.
Query Syntax
:SEARch:SERial:CAN:PATTern:DATA?
The :SEARch:SERial:CAN:PATTern:DATA? query returns the current data value
setting.
Return Format
<string><NL>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X}
for hexadecimal
See Also • Chapter 30, “:SEARch Commands,” starting on page 889
• ":SEARch:SERial:CAN:MODE" on page 927
• ":SEARch:SERial:CAN:PATTern:DATA:LENGth" on page 930

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English