Keysight Technologies InfiniiVision 3000T X Series - :SEARch:PEAK:THReshold

:SEARch Commands 30
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 909
:SEARch:PEAK:THReshold
(see page 1276)
Command Syntax
:SEARch:PEAK:THReshold <level>
<level> ::= necessary level to be considered a peak, in NR3 format.
The :SEARch:PEAK:THReshold command specifies the threshold level necessary to
be considered a peak.
The threshold level units are specified by the :FUNCtion<m>[:FFT]:VTYPe
command.
Query Syntax
:SEARch:PEAK:THReshold?
The :SEARch:PEAK:THReshold? query returns the specified threshold level for FFT
peak search.
Return Format
<level><NL>
<level> ::= in NR3 format.
See Also • ":FUNCtion<m>[:FFT]:VTYPe" on page 382
• ":SEARch:PEAK:EXCursion" on page 906
• ":SEARch:PEAK:NPEaks" on page 907
• ":SEARch:PEAK:SOURce" on page 908