To Next Page

To Previous Page

:MEASure Commands 22

Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 519

:MEASure:VTIMe

(see page 1276)

Query Syntax

:MEASure:VTIMe? <vtime_argument>[,<source>]

<vtime_argument> ::= time from trigger in seconds

<source> ::= {<digital channels> | CHANnel<n> | FUNCtion<m> | MATH<m>

| WMEMory<r>}

<digital channels> ::= DIGital<d> for the MSO models

<d> ::= 0 to (# digital channels - 1) in NR1 format

<n> ::= 1 to (# of analog channels) in NR1 format

<m> ::= 1 to (# math functions) in NR1 format

<r> ::= 1 to (# ref waveforms) in NR1 format

The :MEASure:VTIMe? query returns the value at a specified time on the source

specified with :MEASure:SOURce. The specified time must be on the screen and is

referenced to the trigger event. If the optional source parameter is specified, the

current source is modified.

Return Format

<value> ::= value at the specified time in NR3 format

See Also • "Introduction to :MEASure Commands" on page 458

• ":MEASure:SOURce" on page 499

• ":MEASure:TEDGe" on page 507

• ":MEASure:TVALue" on page 509

NOTE

This query is not available if the source is FFT (Fast Fourier Transform).

Keysight Technologies InfiniiVision 3000T X Series User Manual

Questions and Answers: