Keysight Technologies InfiniiVision 3000T X Series - :FFT:VTYPe

:FFT Commands 17
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 361
:FFT:VTYPe
(see page 1276)
Command Syntax
:FFT:VTYPe <units>
<units> ::= {DECibel | VRMS}
The :FFT:VTYPe command specifies FFT vertical units as DECibel or VRMS.
Query Syntax
:FFT:VTYPe?
The :FFT:VTYPe? query returns the current FFT vertical units.
Return Format
<units><NL>
<units> ::= {DEC | VRMS}
See Also • ":FFT:AVERage:COUNt" on page 347
• ":FFT:CENTer" on page 348
• ":FFT:CLEar" on page 349
• ":FFT:DISPlay" on page 350
• ":FFT:DMODe" on page 351
• ":FFT:OFFSet" on page 353
• ":FFT:RANGe" on page 354
• ":FFT:REFerence" on page 355
• ":FFT:SCALe" on page 356
• ":FFT:SOURce1" on page 357
• ":FFT:SPAN" on page 358
• ":FFT:STARt" on page 359
• ":FFT:STOP" on page 360
• ":FFT:WINDow" on page 362