Keysight Technologies InfiniiVision 3000T X Series - :SYSTem:TOUCh

994 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
31 :SYSTem Commands
:SYSTem:TOUCh
(see page 1276)
Command Syntax
:SYSTem:TOUCh <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}}
The :SYSTem:TOUCh command disables or enables the touchscreen.
Query Syntax
:SYSTem:TOUCh?
The :SYSTem:TOUCh? query returns the touchscreen's on/off status.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also • "Introduction to :SYSTem Commands" on page 980