Keysight Technologies InfiniiVision 3000T X Series - :POWer:HARMonics:RUNCount

604 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:HARMonics:RUNCount
(see page 1276)
Query Syntax
:POWer:HARMonics:RUNCount?
Returns the current harmonics analysis' run iteration count. Non Spec values (that
is, harmonics values not specified by the selected standard) are not counted.
Return Format
<count><NL>
<count> ::= integer in NR1 format
See Also • ":POWer:HARMonics:FAILcount" on page 601
• ":POWer:HARMonics:APPLy" on page 598
• ":POWer:HARMonics:DATA" on page 599
• ":POWer:HARMonics:DISPlay" on page 600
• ":POWer:HARMonics:LINE" on page 602
• ":POWer:HARMonics:POWerfactor" on page 603
• ":POWer:HARMonics:STANdard" on page 605
• ":POWer:HARMonics:STATus" on page 606
• ":POWer:HARMonics:THD" on page 607