:SEARch Commands 30
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 907
:SEARch:PEAK:NPEaks
(see page 1276)
Command Syntax
:SEARch:PEAK:NPEaks <number>
<number> ::= max number of peaks to find, 1-10 in NR1 format.
The :SEARch:PEAK:NPEaks command specifies the maximum number of FFT
peaks to find. This number can be from 1 to 10.
Query Syntax
:SEARch:PEAK:NPEaks?
The :SEARch:PEAK:NPEaks? query returns the specified maximum number of FFT
peaks to find.
Return Format
<number><NL>
<number> ::= in NR1 format.
See Also • ":SEARch:PEAK:EXCursion" on page 906
• ":SEARch:PEAK:SOURce" on page 908
• ":SEARch:PEAK:THReshold" on page 909
To Next Page
Loading...
