Keysight Technologies InfiniiVision 3000T X Series

To Next Page

To Previous Page

858 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide

29 :SBUS<n> Commands

:SBUS<n>:SPI:SOURce:MISO

(see page 1276)

Command Syntax

:SBUS<n>:SPI:SOURce:MISO <source>

<source> ::= {CHANnel<n> | EXTernal} for the DSO models

<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models

<n> ::= 1 to (# analog channels) in NR1 format

<d> ::= 0 to (# digital channels - 1) in NR1 format

The :SBUS<n>:SPI:SOURce:MISO command sets the source for the SPI serial

MISO data.

Query Syntax

:SBUS<n>:SPI:SOURce:MISO?

The :SBUS<n>:SPI:SOURce:MISO? query returns the current source for the SPI

serial MISO data.

Return Format

See Also • "Introduction to :TRIGger Commands" on page 1007

• ":SBUS<n>:SPI:SOURce:MOSI" on page 859

• ":SBUS<n>:SPI:SOURce:CLOCk" on page 856

• ":SBUS<n>:SPI:SOURce:FRAMe" on page 857

• ":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA" on page 860

• ":SBUS<n>:SPI:TRIGger:PATTern:MOSI:DATA" on page 862

• ":SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh" on page 861

• ":SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh" on page 863

Keysight Technologies InfiniiVision 3000T X Series - :SBUS<n>:SPI:SOURce:MISO